- Products >
- LPG Tankers
LPG Tankers:
-
General Characteristics
Built to Design Code BS EN 12493:2008.
Reference temperature to Annex B following ADR 2011
Design Conditions 19.23 bar g Pressure/1.0 bar g Vacuum
Hydraulic Test Pressure 25.0 bar g
Design Temperature -20oC min/+50oC max
N.D.Testing Ultrasonic testing of plates to BS EN 10160 GR. S1
100% radiography all butt welds and magnetic crack detection test all fillet welds direct to shell.
Stress relief NO. Corrosion Allowance NIL
Filling ratio 0.42 Kg/Lt (ADR 4.3.3.2.
-
Standard Equipment
Delivery Line, comprising: -
Rego internal valve. 50mm full bore firesafe ball valve downstream of the Rego internal valve. Meter vapour return line branch into rear dished end fitted with internal ¾†NPT excess flow valve and nominal bore firesafe ball valve adjacent to meter. Internal vapour riser pipe fitted terminating at top of the vessel within the vapour space. Liquid fill connection through the bottom of the vessel with 75mm flanged internal valve with A3217FPA pneumatic actuator. 1/4" NPT vent valve fitted between ball valve and ACME coupling
Vapour balance connection comprising 50mm internal excess flow valve. 50mm nominal bore firesafe ball valve and 2†NPT x 2¼†Acme connection and blank cap.
Internal vapour riser pipe fitted terminating at top of the vessel within the vapour space.
-
Pumping and Metering Equipment
Blackmer 2†LGL2E rotary pump with internal by-pass valve, driven via close coupled hydraulic motor from power take off fitted to gearbox incorporating hand brake interlock pneumatic system.
LC Controls 2" MA7-CX10-C.CV flowmeter c/w inlet strainer, vapour eliminator, differential valve, Liquip EMH500 IS electronic register and cab mounted Epson TM295 electronic slip printer and stand.
-
- Matthew
- Director
- matthew.gilmore@maine-group.com
- +44 (0)28 9065 1234